Double Screw Dewatering Machine
Double Screw Dewatering Machine
Capacity：40-200t/d
Power：7.5-18.5kw
Speed Regulation Range：125-1250rpm
Weight：0.75-5t
Introduction
Screw dewatering machine is widely used in the dehydration of high humidity materials such as distiller’s grains and fruit residue before drying. It can reduce the moisture content of the materials to about 50%, and the dehydrated materials can directly enter the drying equipment, greatly reducing the burden on the dryer and greatly reducing energy consumption. It is an essential processing equipment for high humidity materials before drying.
Advantages
1. No clogging, reducing flushing water consumption, saving water cost, and reducing internal circulation load caused by returning clean water.
2. Small floor space and convenient installation.
3. The dehydrator is basically in a closed operating state, with stable and timely processing, reducing on-site odor, and improving the working environment.
4. The screw shaft has low operating speed, low power consumption, and almost no vibration or noise on site.
System
After the material is pre-dehydrated through centrifugal sieve, it enters the extruder from the inlet, and is extruded and dehydrated by a conical spiral before being sent to the outlet. Most of the water is filtered out through the sieve plate, thus achieving the purpose of dehydration. The dehydrated material can be directly fed into the dryer for drying. For different types of materials and changes in output, it can be realized by adjusting the rotation speed of the extruder to achieve the matching of dehydration effect and output.
Technical Parameters
Model | 250 | 300 | 350 | 400 | 450 | 500 |
Power(kw) | 7.5 | 11 | 11 | 15 | 15 | 18.5 |
Speed Regulation Range(rpm) | 125-1250 | |||||
Weight(t) | 0.75 | 1.1 | 1.5 | 2.0 | 3.5 | 5.0 |
Capacity(t/d) | 40 | 70 | 90 | 120 | 160 | 200 |
Floor Area(㎡) | 2.1 | 2.1 | 2.1 | 5.04 | 5.04 | 5.04 |
